10 May 2018

Keller USA Air Filtration Solutions - New Products on Display at NPE2018

Keller USA Air Filtration Solutions - New Products on Display at NPE2018
The NPE 2018 Plastics Show is another very successful show for Keller USA Air Purification Systems. Keller is displaying brand new products as they relate to:

- Dust Collection
- Mist Collection
- Wet Separation
- Explosion/Fire Protection

If you can’t make it to the show, please contact Dempsco at 937-436-1000 and one of our expert sales people will discuss how Keller USA can improve the air quality in your facility.
Author: Cynthia
0 Comments

4 May 2018

Keller USA at NPE2018 in Orlando, FL

Keller USA at NPE2018 in Orlando, FL

Dempsco will be assisting Keller Technologies USA at Booth S21125 at the NPE2018: The Plastics Show in Orlando, FL, May 7-11. 

 

Keller USA, Inc. enables sustainability in production processes through the application of air filtration system solutions.  These systems enhance Air Quality and mitigate the effects of production process emissions through Renewable technologies that provide a high level of filtration for Health & Safety, improve process performance through waste stream reduction, and increase Energy Efficiency.

 

Please stop by the Keller USA booth and say hello and see all the new equipment that Keller Technologies can offer you.   

 

Author: Cynthia
0 Comments

1 May 2018

Eriez Hydroflow Provides a Vacuum Element Filtration System for Major Manufacturer

Eriez Hydroflow Provides a Vacuum Element Filtration System for Major Manufacturer
Hypertherm Inc., a designer and manufacturer of plasma, laser and waterjet cutting systems, needed to reduce cutting oil consumption on Swiss-style lathes and recycle copper chips. Hypertherm contacted Eriez Hydroflow to come up with a new method of recycling the oil and recovering the copper chips and fines. Eriez Hydroflow recommended their Star Filter vacuum element filtration system.

Hypertherm can now recapture all chips and particulate material content so they are recycling 100% of machine chips. Over 3 years, Hypertherm has cut oil consumption by 40 percent! Hypertherm says they have fresh, clean oil and their tool life has gone up.
Author: Cynthia
0 Comments

19 Apr 2018

Thomas Industry Update - Tesla

Tesla's Musk Admits to Over-Automating: 'Humans Are Underrated'.


Thomas Industry provides an update on Tesla. Please see the featured article in the link below where Tesla’s Elon Musk admits to over-automating. Musk says, “Humans are underrated” and “Excessive automation at Tesla was a mistake. To be precise, my mistake.”

https://news.thomasnet.com/featured/tesla-s-musk-admits-to-over-automating-humans-are-underrated-?channel=newsletter&campaign_type=PNA&campaign_name=0418&utm_campaign=

0418&utm_medium=newsletter&utm_source=PNA&tinid=221808667

Author: Cynthia
0 Comments

13 Feb 2018

Dempsco Introduces New Product Line

Dempsco Introduces New Product Line
Dempsco has introduced a new product line to this manufacturer of surgical instruments. Our automation devices make assembly processes more productive and improve quality!

Contact our office at (937)436-1000 / info@dempsco.com for more details.
Author: Cynthia
0 Comments
RSS
1234567